Configure Elicit

As you will see, LiveDC utilizes data from all types of sources. Since LiveDC is a platform hosted in the cloud, it requires an onsite collection device we refer to as Elicit. Elicit is a local application that collects data on an ongoing basis and securely pushes the data up to the LiveDC platform. Elicit comes in two ways: 1) application that resides on a virtual server (Windows or Linux); 2) small appliance to be plugged into the network.

Below are the configuration instructions for the application version of Elicit.

Downloading Elicit

1. On the navigation menu (left-hand side) click "Data" and click "Elicit", this will open a new tab titled "Elicit"
2. Within the Elicit tab, in the upper left-hand corner click "Download" to create a new Elicit collector. This will open up a new window titled "Download Elicit Install File"

1. Click "Download"
2. Open the zip file

3. Open the file titled "config" and minimize for later use
4. Open the file titled "ElicitInstaller", this will open a setup window called "Elicit Setup: Installation Folder"
1. Choose the destination to save the Elicit collector
2. Enter Elicit ID and URL

3. Click "Close"
5. Go back to the LiveDC platform, click the "Refresh" button, in the upper right-hand corner, for the new Elicit collector to appear in the Elicit List
6. Highlight the new Elicit and click "Edit" to authorize
1. This will open a window titled “Edit Elicit”
2. Check the box titled “Authorized” to a green check mark to Authorize the Elicit

3. Click "Save"