Editing Extras (section)

===Instructions===
<ol>
  <li>If you are already in the “Create Component” window skip to step 3a. If you are not in that window continue to step 2.</li>
  <li>On the navigation menu (left-hand side) click “Extras” and click “Components” this will open a new tab titled “Components”</li>
  <li>In the components tab, (in the upper left-hand corner) click the “Create” button. A new window will open up called “Create Component.” If you are in the “Create Hardware” window, component tab in the component section click the star button.</li>
    <ol type="a">
      <li>Enter the peripheral name of the components in the “Name” field</li>
        <ol type="i">
          <li>Examples: Network Card, PCIE Card, etc.</li>
        </ol>
      <li>Enter any additional information about the peripheral in the “Details” field</li>
      <li>Click “Create”</li>
    </ol>
  <li>In the components tab, click the “Create” button or if you are in the “Create Hardware” window, component tab in the component section click the star button.</li>
    <ol type="a">
      <li>Enter the ports in the “Name” field</li>
        <ol type="i">
          <li>Examples: port numbers</li>
        </ol>
      <li>Enter any additional information about the ports in the “Details” field</li>
      <li>Select the peripheral in the “Parent Component” drop-down menu</li>
        <ol type="i">
          <li>Examples: Network Card, PCIE Card, etc.</li>
        </ol>
      <li>Click "Create"</li>
    </ol>
</ol>
<br />