Editing Using LiveDC Search (section)

===Instructions===
<ol>
  <li>On the navigation menu (left side), click the desired tab</li>
  <li>In the desired tab, click the “Search” button in the top right corner</li>
  <li>A new window will open titled “ ( ) Search”</li>
[[File:Search.PNG]]
    <ol type="a">
      <li>Select the criteria of the search</li>
        <ol type="i">
          <li>“All of the following are true” - similar to the AND operator</li>
          <li>“One or more of the following is true” - similar to the OR operator</li>
        </ol>
      <li>Select the desired area to search</li>
        <ol type="i">
          <li>Examples: Status, Name, Contained by Hardware, Created Timestamp, etc. </li>
        </ol>
      <li>For additional areas to specify the search, click the “+” button</li>
      <li>To delete areas from the search, click the “Trashcan” button</li>
      <li>Click “Search”</li>
    </ol>
  <li>To save the search to use in the future, click the “Save” button</li>
    <ol type="a">
      <li>A new window will open titled “Save ( ) Search”</li>
      <li>Name the saved search and click “Save” or overwrite an existing saved search criteria by selecting the saved search in the “Name” drop-down menu and click “Overwrite”</li>
    </ol>
  <li>To use a search that has been saved in the past, click the “Load” button</li>
    <ol type="a">
      <li>A new window will open titled “Load ( ) Search”</li>
      <li>Select the saved search to load in the drop-down menu titled “Name”</li>
      <li>Click "Load"</li>
    </ol>
  <li>To reset the search criteria, click the “Reset” button on the main search window</li>
  <li>All searches, saved or new, are specific to the area you are in or the type of record you are looking to obtain</li>
</ol>