Editing Extras (section)

===Instructions===
<ol>
  <li>If you are already in the “Create Layer” window skip to step 3a. If you are not in that window continue to step 2.</li>
  <li>On the navigation menu (left-hand side) click “Extras” and click “Layers” this will open a new tab titled “Layers”</li>
  <li>Within the layers tab, (in the upper left-hand corner) click the “Create” button. A new window will open up called “Create Layer.”</li>
    <ol type="a">
      <li>Enter the name of the layer in the “Name” field</li>
        <ol type="i">
          <li>Examples: Floor Plan, Cost Per Cabinet, Humidity % 10 inch, Solid Background, etc.</li>
        </ol>
      <li>Enter any additional information about the layer in the “Details” field</li>
      <li>Select the type of layer desired in the “Layer Type” drop-down menu</li>
        <ol type="i">
          <li>If “Basic Influence," choose which legend to use in the “Legend” drop-down menu or create a new “Legend” record by clicking the star button (see [[#Creating a Legend|Creating a Legend]] section for instructions)</li>
          <li>If “Image," select the appropriate image from the drop-down menu or create a new “Image” record by clicking the star button (see [[#Uploading an Image|Uploading an Image]] section for instructions. Select the placement of the image from the drop-down menu.</li>
          <li>If “Link," no additional information is needed</li>
          <li>If “Solid," define the desired color and percentage of transparency in the “Color” and “Transparency Percentage” fields</li>
        </ol>
      <li>Click “Create,” you can now view your layer in the Layers List</li>
      <li>If you created a "Link Layer" see the next steps in section [[#Attaching a Link to a Link Layer|Attaching a Link to a Link Layer]]</li>
    </ol>
</ol>
<br />