Editing Extras (section)

===Instructions===
<ol>
  <li>If you are already in the “Create Shape” window skip to step 3a. If you are not in that window continue to step 2.</li>
  <li>On the navigation menu (left-hand side) click “Extras” and click “Shapes” this will open a new tab titled “Shapes”</li>
  <li>Within the shapes tab (upper left-hand corner) click the “Create” button. A new window will open up called “Create Shape.”</li>
    <ol type="a">
      <li>Enter the name of the shape in the “Name” field</li>
        <ol type="i">
          <li>Examples: Cabinet, Standard Humidity Return, Standard Temperature, etc.</li>
        </ol>
      <li>Enter any additional information about the shape in the “Details” field</li>
      <li>Select what kind of shape to create in the “Basic Shape” drop-down menu</li>
      <li>Define the height of the shape in the “Pixel Height” field</li>
      <li>Enter a value for the width in the “Scale Width” field</li>
        <ol type="i">
          <li>This value is in relation to the height, so if you wanted a square that was 10 high x 20 wide, you would enter 10 for height and 2 for scale width</li>
        </ol>
      <li>Enter a value of rotation for the shape in the “Rotation Degrees” field</li>
        <ol type="i">
          <li>This would be used if you wanted to represent a diamond, you would create a square and rotate it 90 degrees</li>
        </ol>
      <li>Click "Create"</li>
    </ol>
</ol>
<br />