Editing Extras (section)

==Creating a SNMP V1 Template==
An SNMP V1 template is a set of rules for Elicit to follow to collect data points from an asset. Utilizing a web address, read community string, and an OID, Elicit will gather information using these instructions and populate data series for use in maps, LiveTiles, and/or graphs. You will need to gather the following information to create an SNMP V1 template:
*Name of the SNMP V1 template you wish to create
*IP address or URL for Elicit to communicate with
*Specified read community string: default is public
*Specific OID for the piece of information you are trying to gather
*The regular expression to tell Elicit which data you are specifically looking for
*An adjustment expression for the data being returned to the LiveDC platform
*Specific invalid raw values that are typically returned, which can be excluded. Some sensors return a 0 when in error state.

[[File:SNMP V1 Template.PNG]]

===Instructions===
<ol>
  <li>If you are already in the “Create SNMP V1 Template” window skip to step 3a. If you are not in that window continue to step 2.</li>
  <li>On the navigation menu (left-hand side) click “Extras” and click “SNMP V1 Templates” this will open a new tab titled “SNMP V1 Templates”</li>
  <li>Within the SNMP V1 templates tab (upper left-hand corner) click the “Create” button. A new window will open up called “Create SNMP V1 Template.”</li>
    <ol type="a">
      <li>Enter the name of the SNMP V1 template in the “Name” field</li>
        <ol type="i">
          <li>Examples: Chatsworth Humidity (Port 1), Chatsworth Power % 30A (Phase XY), etc.</li>
        </ol>
      <li>Enter any additional information about the SNMP V1 template in the “Details” field</li>
      <li>The parameter format can be left as is and provides a way for you to specify what values you need to enter and what the label should be in the pop-up screen</li>
      <li>Enter the Internet Protocol Address in the “Address” field using the defined parameter format</li>
        <ol type="i">
          <li>Example: { {Address} }</li>
          <li>This will prompt the user to enter the specific IP address each time</li>
        </ol>
      <li>Enter the community string in the “Read Community String” field using the defined parameter format</li>
        <ol type="i">
          <li>If standard across the organization, you can enter it here and not have to enter it again when creating a data series</li>
        </ol>
      <li>Enter the object identification number in the “Object Identifier OID” field using the defined parameter format</li>
        <ol type="i">
          <li>Usually very specific for a type of power strip and can be entered here once and used for all power strips of that type</li>
          <li>Example: 1.3.6.1.4.1.319.1.2.1.0</li>
        </ol>
      <li>Define the regular expression in the “Regular Expression” field</li>
        <ol type="i">
          <li>Leave blank as it is not really leveraged at this time</li>
        </ol>
      <li>Define the adjustment expression in the “Adjustment Expression” field</li>
        <ol type="i">
          <li>This will take the raw value received via SNMP and perform an adjustment on that before sending the database for data normalization</li>
          <li>Example: Raw/100</li>
        </ol>
      <li>Add any raw values that are invalid in the “Invalid Raw Values” field and click the left-hand facing arrow, if applicable</li>
      <li>Click “Create”</li>
    </ol>
</ol>
<br />